Protocol: NCI STD<\/p>\n
Baud Rate: 9600<\/p>\n
Parity: Even<\/p>\n
Data Bits: 7<\/p>\n
Stop Bits: \u00a01<\/p><\/blockquote>\n
Scale may be set up in “high resolution” or “classifier” mode. For high resolution mode, the weight is returned as a decimal value representing total weight in pounds (lbs) or kilograms (kgs). In either configuration,\u00a0SEOM<\/span>\u00a0will send the following:<\/p>\nW<CR><\/strong><\/p>\nWhich represents the character “W” and a carriage return “<CR>” (chr(13) or hex(0D)).<\/p><\/blockquote>\n
The scale will respond with one of the following two results depending on mode:<\/p>\n
\n\n- If scale is set up in High Resolution mode, the weight is passed to the Order Manager as a decimal value with a unit measurement of “lb” or “kg”<\/li>\n<\/ol>\n
<LF>xxxx.xxuu<CR><\/strong><\/p>\n<LF>hhh<CR><ETX><\/strong><\/p>\nThis represents a line feed character <LF> (chr(10) or hex(0A)) followed by the decimal weight value xxxx.xx and the unit of measure “uu” followed by a carriage return (chr(13) or hex(0D)). The second line contains a Line Feed character, the scale\u2019s status code “hhh” followed by another carriage return and the End of Text character (chr(3) or hex(03)).<\/p>\n
The Order Manager will return the decimal value representing the total pounds (i.e. a package weighing 10lbs 4.5oz will report a total weight of 10.28lbs)<\/p>\n
\n- If the scale is set up in Classifier mode to report weights in lbs\/ozs for lighter packages or letters, the weight is passed to\u00a0SEOM<\/span>\u00a0with two values representing the amount in pounds and the amount of ounces as follows:<\/li>\n<\/ol>\n
<LF>xxlb<sp>xx.xoz<CR><\/strong><\/p>\n<LF>hhh<CR><ETX><\/strong><\/p>\nThis represents a line feed character <LF> (chr(10) or hex(0A)) followed by the weight value in pounds “xxlb” (i.e. a 10 pound package would appear as “10lb”. A space character <sp> (chr(32) or hex(20)) separates the weight value in ounces “xx.xoz” (i.e. 10 – 1\/2 ounces would appear as “10.5oz” followed by a carriage return character (chr(13) or hex(0D)). The second line contains a Line Feed character, the scale\u2019s status code “hhh” followed by another carriage return and the End of Text character (chr(3) or hex(03)).<\/p>\n
SEOM <\/span>will parse the two values and combine them into a decimal value representing the total pounds (i.e. a package weighing 10lbs 4.5oz will report a total weight of 10.28lbs)<\/p><\/blockquote>\nNCI Weigh-Tronix Models 7620u, 7815, 7820, 7820R, 7821, 7824, 7829, 7840, 7880, 7885<\/h4>\nSEOM<\/span>\u00a0Settings:<\/h5>\nSet Shipping Group\u00a0ScaleType\u00a0parameter to “NCI78XX”<\/p>\n
Scale\u2019s Settings:<\/h5>\nProtocol: NCI STD<\/p>\n
Baud Rate: 9600<\/p>\n
Parity: Even<\/p>\n
Data Bits: 7<\/p>\n
Stop Bits: \u00a01<\/p><\/blockquote>\n
To request the weight reading,\u00a0SEOM<\/span>\u00a0sends the following:<\/p>\nW<CR><\/strong><\/p>\nWhich represents the character “W” and a carriage return (chr(13) or hex(0D)).<\/p><\/blockquote>\n
The weight response from the scale is passed to\u00a0SEOM<\/span>\u00a0as a decimal value with a unit measurement of “lb” or “kg” in the following format:<\/p>\n\u00a0<LF>xxxx.xxuu<CR><\/strong><\/p>\n<LF>hhh<CR><ETX><\/strong><\/p>\nThis represents a line feed character <LF> (chr(10) or hex(0A)) followed by the decimal weight value xxxx.xx and the unit of measure “uu” represented as either pounds “lb” or kilograms “kg” followed by a carriage return (chr(13) or hex(0D)). The second line contains a Line Feed character, the scale\u2019s status code “hhh” followed by another carriage return and the End of Text character (chr(3) or hex(03)).<\/p>\n
SEOM<\/span>\u00a0returns the decimal value representing the total pounds, for example, a package weighing 10lbs 4.5oz will report a total weight of 10.28lbs.<\/p><\/blockquote>\nAvery Weigh-Tronix Model 3700LP<\/h4>\nSEOM\u00a0Settings:<\/h5>\n
Set Shipping Group\u00a0ScaleType\u00a0parameter to “AWT3700”<\/p>\n
Scale\u2019s Settings:<\/h5>\nProtocol: NCI STD<\/p>\n
Baud Rate: 9600<\/p>\n
Parity: None<\/p>\n
Data Bits: 8<\/p>\n
Stop Bits: \u00a01<\/p><\/blockquote>\n
To request the weight reading,\u00a0SEOM<\/span>\u00a0will send the following:<\/p>\nW<CR><\/strong><\/p>\nWhich represents the character “W” and a carriage return <CR><\/p>\n
(chr(13) or hex(0D)).<\/p><\/blockquote>\n
<\/p>\n
The weight response from the scale is passed to\u00a0SEOM<\/span>\u00a0as a decimal value with a unit measurement of “lb”, “kg”, “oz” or “g” in the following format depending on weight range set on the scale:<\/p>\nWeight in pounds:<\/p>\n
<LF>XXX.XXlb<CR><\/strong><\/p>\n<LF>[HL]<CR><ETX><\/strong><\/p>\nThis represents a line feed character <LF> (chr(10) or hex(0A)) followed by and underscore character (chr(95) or hex(5F)), the decimal weight value xxx.xx, the unit of measure “lb”, another underscore followed by a carriage return (chr(13) or hex(0D)). The second line contains a Line Feed character, the scale\u2019s status code “[HL]” followed by another carriage return and the End of Text character <ETX> (chr(3) or hex(03)).<\/p>\n
SEOM<\/span>\u00a0returns the decimal value representing the total pounds.<\/p>\nWeight in kilograms:<\/p>\n
<LF>XXX.XXkg<CR><\/strong><\/p>\n<LF>[HL]<CR><ETX><\/strong><\/p>\nThis represents a line feed character <LF> (chr(10) or hex(0A)) followed by and underscore character (chr(95) or hex(5F)), the decimal weight value xxx.xx, the unit of measure “kg”, another underscore followed by a carriage return (chr(13) or hex(0D)). The second line contains a Line Feed character, the scale\u2019s status code “[HL]” followed by another carriage return and the End of Text character <ETX> (chr(3) or hex(03)).<\/p>\n
SEOM<\/span>\u00a0returns the decimal value representing the total kilograms.<\/p>\nWeight in ounces:<\/p>\n
<LF>XXX.XXoz<CR><\/strong><\/p>\n<LF>[HL]<CR><ETX><\/strong><\/p>\nThis represents a line feed character <LF> (chr(10) or hex(0A)) followed by and underscore character (chr(95) or hex(5F)), the decimal weight value xxx.xx, the unit of measure “oz”, another underscore followed by a carriage return (chr(13) or hex(0D)). The second line contains a Line Feed character, the scale\u2019s status code “[HL]” followed by another carriage return and the End of Text character <ETX> (chr(3) or hex(03)).<\/p>\n
SEOM<\/span>\u00a0returns the decimal value representing the total pounds, for example, a package weighing 164.5oz will report a total weight of 10.28lbs.<\/p>\nWeight in grams:<\/p>\n
<LF>_XXXXg_<CR><\/strong><\/p>\n<LF>[HL]<CR><ETX><\/strong><\/p>\nThis represents a line feed character <LF> (chr(10) or hex(0A)) followed by and underscore character (chr(95) or hex(5F)), the decimal weight value xxx.xx, the unit of measure “g”, another underscore followed by a carriage return (chr(13) or hex(0D)). The second line contains a Line Feed character, the scale\u2019s status code “[HL]” followed by another carriage return and the End of Text character <ETX> (chr(3) or hex(03)).<\/p>\n
SEOM<\/span>\u00a0returns the decimal value representing the total kilograms, for example, a package weighing 1035g will report a total weight of 1.035kg.<\/p><\/blockquote>\nSalter-Brecknell Model 7010SB<\/h4>\nSEOM<\/span>\u00a0Settings:<\/h5>\nSet Shipping Group\u00a0ScaleType\u00a0parameter to “7010SB”<\/p>\n
Scale\u2019s Settings:<\/h5>\nBaud Rate: 2400<\/p>\n
Parity: None<\/p>\n
Data Bits: 8<\/p>\n
Stop Bits: \u00a02<\/p><\/blockquote>\n
Note: Scale “zeroing” not supported for this scale<\/p>\n
To request the weight reading,\u00a0SEOM<\/span>\u00a0sends the following:<\/p>\nNetWt<\/strong><\/p>\nWhich represents the character string “NetWt”<\/p><\/blockquote>\n
The weight response from the scale is 10 characters long and is passed to\u00a0SEOM<\/span>\u00a0in a continuously repeating stream to a maximum of 30 characters in length. Response output string may begin at any character position and rrepeats a number of times in output up to the 30 character limit.<\/p>\nExample output strings:<\/p>\n
127<\/p>\n
0 \u00a000127<\/p>\n
0 \u00a000127<\/p>\n
0 \u00a000<\/p>\n
0 \u00a000127<\/p>\n
0 \u00a000127<\/p>\n
0 \u00a000127<\/p>\n
0 \u00a000127<\/p>\n
0 \u00a000127<\/p>\n
0 \u00a000127<\/p><\/blockquote>\n
Response is in one of two possible formats depending on the weight range set on the scale (lb-oz or grams).<\/p>\n
Pounds & ounces:<\/strong><\/p>\n<STX>0<sp><sp>xxxxx<CR><\/strong><\/p>\n<STX> represents the Start of Text character (chr(2) or hex (02)) followed by a zero character, 2 space characters <sp> (chr(32) or hex(20)), the five digit weight reading “xxxxx” and a carriage return character <CR> (chr(13) or hex(0D)).<\/p>\n
Digit positions are read left to right. The five digit weight reading is broken down as follows:<\/p>\n
Position 1 & 2 represent the number of pounds<\/p>\n
Position 3 & 4 represent the whole number of ounces<\/p>\n
Position 5 represents tenths of an ounce<\/p>\n
(i.e. 3lbs 6.5oz is represented as 03065)<\/p>\n
SEOM<\/span>\u00a0parses the weight, performs the appropriate conversions and returns total weight in pounds. For example, a 3lb 6.5oz package represented as 03065 \u00a0actually returns 3.40625 lbs<\/p>\n(“03” lbs +((“065″\/10) oz \u00a0\/ 16))<\/p>\n
Grams:<\/strong><\/p>\n<STX>@<sp><sp>xxxxx<CR><\/strong><\/p>\n<STX> represents the Start of Text character (chr(2) or hex (02)) followed by the “at” symbol (chr(95) or hex(5F)), 2 spaces <sp> (chr(32) or hex(20)), the 5 digit weight reading “xxxxx” and a carriage return character (chr(13) or hex(0D)).<\/p>\n
SEOM<\/span>\u00a0reads the weight in grams, performs the appropriate conversion and returns the total weight in kilograms. For example, a 2657 gram package represented as 02657 will actually return 2.657 kg (“02657” \/ 1000).<\/p><\/blockquote>\nFairbanks<\/h4>\nSEOM<\/span>\u00a0Settings:<\/h5>\nSet Shipping Group\u00a0ScaleType\u00a0parameter to “Fairbanks”<\/p>\n
Note: This option is one of the original scale settings available in SEOM<\/span>\u00a0and pertains to the Ultegra SCB-R9000 used in-house to write the original scale interface for\u00a0SEOM<\/span>. The Scale Settings below are not the default settings applied to the scale at the Fairbanks factory. It is recommended to use the FBUltegra scale option in\u00a0SEOM<\/span>\u00a0to run the scale with its default settings.<\/p>\nNote: Scale “zeroing” not supported for this scale<\/p>\n
Scale\u2019s Settings:<\/h5>\nProtocol: Output 1 Protocol<\/p>\n
Baud Rate: 9600<\/p>\n
Parity: None<\/p>\n
Data Bits: 7<\/p>\n
Stop Bits: \u00a02<\/p><\/blockquote>\n
To request the weight reading,\u00a0SEOM<\/span>\u00a0will send the following:<\/p>\n<CR><\/strong><\/p>\nWhich represents a carriage return (chr(13) or Hex(0D))<\/p><\/blockquote>\n
The response from the scale is:<\/p>\n
XXXX.XX<SP>lb or kg<SP>gr or GR<SP><SP><CR><LF><EOT><\/strong><\/p>\nThe xxxx.xx represents the decimal value of the weight in pounds or kilograms followed by a space character <SP> (chr(32) or hex(20)) and the weight unit (lb or kg). An additional space character <SP> will be followed by the scale “in motion” status (“gr” \u2013 movement or “GR” \u2013 good read), two space characters <SP>, a carriage return <CR> (chr(13) or Hex (0D)) and line feed <LF> (chr(10) or Hex(0A)) ending with the End of Text character <EOT> (Chr(3) or Hex(03)).\u00a0SEOM<\/span>\u00a0returns the decimal value of the weight in pounds or kilograms.<\/p><\/blockquote>\nFairbanks Models: 2455, R9000, Ultegra, FBR9000<\/h4>\nSEOM<\/span>\u00a0Settings:<\/h5>\nFor 2455 – Set Shipping Group\u00a0ScaleType\u00a0parameter to “FB2455”<\/p>\n
For R9000 – Set Shipping Group\u00a0ScaleType\u00a0parameter to “FBR9000”<\/p>\n
For FBR9000 – Set Shipping Group\u00a0ScaleType\u00a0parameter to “FBR9000”<\/p>\n
For Ultegra – Set Shipping Group\u00a0ScaleType\u00a0parameter to “FBUltegra”<\/p>\n
Note: Scale “zeroing” not supported for this scale<\/p>\n<\/blockquote>\n
Scale\u2019s Settings:<\/h5>\nProtocol: Output 1 Protocol<\/p>\n
Baud Rate: 9600<\/p>\n
Parity: Odd<\/p>\n
Data Bits: 7<\/p>\n
Stop Bits: \u00a02<\/p><\/blockquote>\n
To request the weight reading,\u00a0SEOM<\/span>\u00a0sends the following:<\/p>\n<CR><\/strong><\/p>\nWhich represents a carriage return (chr(13) or Hex(0D))<\/p><\/blockquote>\n
The response from the scale is:<\/p>\n
XXXX.XX<SP>lb or kg<SP>gr or GR<SP><SP><CR><LF><EOT><\/strong><\/p>\nThe xxxx.xx represents the decimal value of the weight in pounds or kilograms followed by a space character <SP> (chr(32) or hex(20)) and the weight unit (lb or kg). An additional space character <SP> will be followed by the scale “in motion” status (“gr” \u2013 movement or “GR” \u2013 good read), two space characters <SP>, a carriage return <CR> (chr(13) or Hex (0D)) and line feed <LF> (chr(10) or Hex(0A)) ending with the End of Text character <EOT> (Chr(3) or Hex(03)).\u00a0SEOM<\/span>\u00a0returns the decimal value of the weight in pounds or kilograms.<\/p><\/blockquote>\nFairbanks Models: QuickSilver<\/h4>\nSEOM<\/span>\u00a0Settings:<\/h5>\nSet Shipping Group\u00a0ScaleType\u00a0parameter to “FBQuickSilver”<\/p>\n
Note: Scale “zeroing” not supported for this scale<\/p>\n
Scale\u2019s Settings:<\/h5>\nScale Output to computer must be activated and Device Code set to “CP”<\/p>\n
Baud Rate: 2400<\/p>\n
Parity: None<\/p>\n
Data Bits: 8<\/p>\n
Stop Bits: \u00a01<\/p><\/blockquote>\n
To request the weight reading,\u00a0SEOM<\/span>\u00a0sends the following:<\/p>\n<CR><\/strong><\/p>\nWhich represents a carriage return (chr(13) or Hex(0D))<\/p><\/blockquote>\n
The response from the scale contains the following:<\/p>\n
<SP><SP>XXXXXX<SP>lb or kg or kg or g<SP>GR or NT<CR><LF><CR><LF><\/p>\n
The response begins with two space characters <SP> (chr(32) or Hex(20)) followed by the decimal weight reading xxxxxx, a space character <SP> and the weight unit (“lb”, “kg”, “oz” or “g”). After the weight is a space character <SP>, the reading identifier for Gross or Net (“GR” or “NT”) ending with a pair of carriage return <CR> (chr(13) or Hex(0D)) and line feed characters <LF> (chr(10) or Hex(0A)). Weight is returned in decimal pounds or kilograms.<\/p><\/blockquote>\n
Fairbanks Models: Series III<\/h4>\nSEOM<\/span>\u00a0Settings:<\/h5>\nSet Shipping Group\u00a0ScaleType\u00a0parameter to “FBSeriesIII”<\/p>\n
Note: Scale “zeroing” not supported for this scale<\/p>\n
Scale\u2019s Settings:<\/h5>\nBaud Rate: 2400<\/p>\n
Parity: None<\/p>\n
Data Bits: 8<\/p>\n
Stop Bits: \u00a01<\/p><\/blockquote>\n
To request the weight reading,\u00a0SEOM<\/span>\u00a0sends the following:<\/p>\n<CR><\/strong><\/p>\nWhich represents a carriage return (chr(13) or Hex(0D))<\/p><\/blockquote>\n
The response from the scale contains the following:<\/p>\n
GR<SP>xxxxxxx<SP>lb or kg<CR><LF><\/p>\n
NT<SP>xxxxxxx<SP>lb or kg<CR><LF><\/p>\n
TA<SP>xxxxxxx<SP>lb or kg<CR><LF><\/p>\n
QTY<SP>xxxxxx<SP>P or C or S<CR><LF><\/p>\n
APW1000<SP>xxxxxx<SP>lb or kg<CR><LF>x<\/p>\n
<CR><LF><\/p>\n
<CR><LF><\/p>\n
<CR><LF><\/p>\n
<CR><LF><\/p>\n
<CR><LF><\/p>\n
<\/p>\n
SEOM<\/span>\u00a0only pulls the value from the first line. The remainder of the data is ignored.<\/p>\nLine 1 begins with “GR” representing the Gross Weight followed by a space <SP> (chr(32) or Hex (20)), the weight reading, another space <SP>, the weight unit (“lb” or “kg”) followed by carriage return <CR> (chr(13) or Hex(0D)) and line feed <LF> (chr(10) or hex(0A)) characters. Weight is returned in decimal pounds or kilograms<\/p><\/blockquote>\n
Mettler-Toledo Models: PS30, PS3L, PS60 (G & U), PS6L, PS90, 8213<\/h4>\nSEOM<\/span>\u00a0Settings:<\/h5>\nFor PS30 – Set Shipping Group\u00a0ScaleType\u00a0parameter to “MTPS30”<\/p>\n
For PS3L – Set Shipping Group\u00a0ScaleType\u00a0parameter to “MTPS3L”<\/p>\n
For PS60G – Set Shipping Group\u00a0ScaleType\u00a0parameter to “MTPS60G”<\/p>\n
For PS60U – Set Shipping Group\u00a0ScaleType\u00a0parameter to “MTPS60U”<\/p>\n
For PS6L – Set Shipping Group\u00a0ScaleType\u00a0parameter to “MTPS6L”<\/p>\n
For PS90 – Set Shipping Group\u00a0ScaleType\u00a0parameter to “MTPS90”<\/p>\n
For 8213 – Set Shipping Group\u00a0ScaleType\u00a0parameter to “MT8213”<\/p><\/blockquote>\n
Scale\u2019s Settings:<\/h5>\nProtocol: Toledo (MT Command Set)<\/p>\n
Note: Mettler scales can also be run using the Proto 3 protocol to emulate NCI-Weightronix scales. If you have set up your scale to run this protocol, please see the settings for NCI76XX scales.<\/i><\/p>\n
Baud Rate: 9600<\/p>\n
Parity: Even<\/p>\n
Data Bits: 7<\/p>\n
Stop Bits: 1 (for the 8213, set it to 2)<\/p><\/blockquote>\n
To request the weight reading,\u00a0SEOM<\/span>\u00a0sends the following:<\/p>\nW<CR><\/strong><\/p>\nWhich represents the letter W followed by a carriage return (chr(13) or Hex(0D))<\/p><\/blockquote>\n
The response from the scale depends on whether the scales has been set up to return pounds or pounds and ounces:<\/p>\n
For pound builds:<\/p>\n
<STX>XXX.XX<CR><\/strong><\/p>\nFor pound-ounce builds<\/p>\n
<STX>XXXlbXX.Xoz<CR><\/strong><\/p>\nError condition<\/p>\n
<STX>?<StatusByte><CR><\/strong><\/p>\nThe responses start with a Start of Text character <STX> (chr(2) or hex(02)). Depending on the setup, the weight can be returned in decimal format xxx.xx or in pound\/ounce format xxxlbxx.xoz followed by a carriage return <CR> (chr(13) or hex(0D)). Either response format will be returned as a decimal value in pounds.<\/p>\n
Should the response be an error condition, the user will be prompted with the error.<\/p><\/blockquote>\n
Endicia ES2500U 25LB and USPS PS311 30lb<\/h4>\n
The Endicia ES2500U uses a standard USB connection and does not require any additional set up to be recognized by your computer.<\/p>\n
Scales distributed by USPS\/Endicia (regardless of the manufacturer) that have a PID of 6A73 or 6A78 and a VID of 1446 are supported by\u00a0SEOM<\/span>\u00a0when the system parameter\u00a0ScaleType\u00a0is set to ES2500U, ES7500U or USPS-311.<\/p>\nIMPORTANT NOTE: USPS and Endicia may sell one or more models of the ES2500U or PS311 that DO NOT work with\u00a0SEOM<\/span>\u00a0The models currently supported by\u00a0SEOM<\/span>\u00a0have a\u00a0vendor ID (VID) of 1446\u00a0and a\u00a0product ID (PID) of 6A73 or 6A78. If you are having trouble connecting the ES2500U or PS311 with\u00a0SEOM<\/span>, check the vendor ID and product ID, as shown below.<\/p>\nFollow these steps to determine the vendor ID and product ID of your device:<\/p>\n
\n- Open\u00a0System Properties\u00a0(right-click\u00a0My Computer\u00a0and select\u00a0Properties)\u00a0Hardware Tab\u00a0>\u00a0Device Manager.<\/li>\n<\/ol>\n
![\"\"](\"https:\/\/stoneedge.com\/kb\/wp-content\/uploads\/2019\/04\/winxpdevicemanagerimage.jpg\")
<\/p>\n
\n- Expand the\u00a0Human Interface Devices\u00a0section in Device Manager.<\/li>\n
- If the scale was the last item plugged in, it will be the last item in the list. (It will probably not be identified with the name of the scale; it should say something like\u00a0Generic Human Interface Device.) Right click this entry and select\u00a0Properties.<\/li>\n
- On the\u00a0Details\u00a0tab, select\u00a0Device Instance ID\u00a0from the drop-down list. The VID and PID will be visible in the Device ID. The example below shows a vendor ID (VID) of \u201d045E\u201d and a product ID (PID) of \u201d0040\u201d.<\/li>\n<\/ol>\n
![\"\"](\"https:\/\/stoneedge.com\/kb\/wp-content\/uploads\/2019\/04\/winxpdevicemanagerdetailstab.jpg\")
<\/p>\n
Dymo M25<\/h4>\n
The Dymo M25 uses a standard USB connection and does not require any additional set up to be recognized by your computer. If you get a message about the PID or VID being invalid, contact Stone Edge Technical Support for assistance.<\/p>\n","protected":false},"excerpt":{"rendered":"
Shipping Scales Supported by\u00a0SEOM Scale Brand Serial Port Connection Only USB Connection Only Serial Port and USB Salter-Brecknell 7010SB Avery Weigh-Tronix 3700LP Fairbanks 2455, R9000, QuickSilver, Series III FBR9000 Ultegra and Ultegra Junior Mettler-Toledo PS3L, PS30, PS6L, PS90, 8213 PS60 G and U NCI 7620, 7620u, 7680, 7815, 7820, 7820R,…<\/p>\n","protected":false},"author":2,"comment_status":"closed","ping_status":"closed","template":"","format":"standard","meta":[],"ht-kb-category":[146,28],"ht-kb-tag":[],"yoast_head":"\n
Shipping Scale Setup - Stone Edge Order Manager<\/title>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/stoneedge.com\/kb\/articles\/shipping-scale-setup\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Shipping Scale Setup - Stone Edge Order Manager\" \/>\n<meta property=\"og:description\" content=\"Shipping Scales Supported by\u00a0SEOM Scale Brand Serial Port Connection Only USB Connection Only Serial Port and USB Salter-Brecknell 7010SB Avery Weigh-Tronix 3700LP Fairbanks 2455, R9000, QuickSilver, Series III FBR9000 Ultegra and Ultegra Junior Mettler-Toledo PS3L, PS30, PS6L, PS90, 8213 PS60 G and U NCI 7620, 7620u, 7680, 7815, 7820, 7820R,...\" \/>\n<meta property=\"og:url\" content=\"https:\/\/stoneedge.com\/kb\/articles\/shipping-scale-setup\/\" \/>\n<meta property=\"og:site_name\" content=\"Stone Edge Order Manager\" \/>\n<meta property=\"article:modified_time\" content=\"2024-07-29T17:33:02+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/stoneedge.com\/kb\/wp-content\/uploads\/2019\/04\/winxpdevicemanagerimage.jpg\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data1\" content=\"16 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":\"WebPage\",\"@id\":\"https:\/\/stoneedge.com\/kb\/articles\/shipping-scale-setup\/\",\"url\":\"https:\/\/stoneedge.com\/kb\/articles\/shipping-scale-setup\/\",\"name\":\"Shipping Scale Setup - Stone Edge Order Manager\",\"isPartOf\":{\"@id\":\"https:\/\/stoneedge.com\/kb\/#website\"},\"datePublished\":\"2019-04-01T19:01:56+00:00\",\"dateModified\":\"2024-07-29T17:33:02+00:00\",\"breadcrumb\":{\"@id\":\"https:\/\/stoneedge.com\/kb\/articles\/shipping-scale-setup\/#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\/\/stoneedge.com\/kb\/articles\/shipping-scale-setup\/\"]}]},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\/\/stoneedge.com\/kb\/articles\/shipping-scale-setup\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\/\/stoneedge.com\/kb\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Shipping Scale Setup\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\/\/stoneedge.com\/kb\/#website\",\"url\":\"https:\/\/stoneedge.com\/kb\/\",\"name\":\"Stone Edge Order Manager\",\"description\":\"Documentation for the Stone Edge Order Manager\",\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\/\/stoneedge.com\/kb\/?s={search_term_string}\"},\"query-input\":\"required name=search_term_string\"}],\"inLanguage\":\"en-US\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"Shipping Scale Setup - Stone Edge Order Manager","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/stoneedge.com\/kb\/articles\/shipping-scale-setup\/","og_locale":"en_US","og_type":"article","og_title":"Shipping Scale Setup - Stone Edge Order Manager","og_description":"Shipping Scales Supported by\u00a0SEOM Scale Brand Serial Port Connection Only USB Connection Only Serial Port and USB Salter-Brecknell 7010SB Avery Weigh-Tronix 3700LP Fairbanks 2455, R9000, QuickSilver, Series III FBR9000 Ultegra and Ultegra Junior Mettler-Toledo PS3L, PS30, PS6L, PS90, 8213 PS60 G and U NCI 7620, 7620u, 7680, 7815, 7820, 7820R,...","og_url":"https:\/\/stoneedge.com\/kb\/articles\/shipping-scale-setup\/","og_site_name":"Stone Edge Order Manager","article_modified_time":"2024-07-29T17:33:02+00:00","og_image":[{"url":"https:\/\/stoneedge.com\/kb\/wp-content\/uploads\/2019\/04\/winxpdevicemanagerimage.jpg"}],"twitter_card":"summary_large_image","twitter_misc":{"Est. reading time":"16 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"WebPage","@id":"https:\/\/stoneedge.com\/kb\/articles\/shipping-scale-setup\/","url":"https:\/\/stoneedge.com\/kb\/articles\/shipping-scale-setup\/","name":"Shipping Scale Setup - Stone Edge Order Manager","isPartOf":{"@id":"https:\/\/stoneedge.com\/kb\/#website"},"datePublished":"2019-04-01T19:01:56+00:00","dateModified":"2024-07-29T17:33:02+00:00","breadcrumb":{"@id":"https:\/\/stoneedge.com\/kb\/articles\/shipping-scale-setup\/#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/stoneedge.com\/kb\/articles\/shipping-scale-setup\/"]}]},{"@type":"BreadcrumbList","@id":"https:\/\/stoneedge.com\/kb\/articles\/shipping-scale-setup\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/stoneedge.com\/kb\/"},{"@type":"ListItem","position":2,"name":"Shipping Scale Setup"}]},{"@type":"WebSite","@id":"https:\/\/stoneedge.com\/kb\/#website","url":"https:\/\/stoneedge.com\/kb\/","name":"Stone Edge Order Manager","description":"Documentation for the Stone Edge Order Manager","potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/stoneedge.com\/kb\/?s={search_term_string}"},"query-input":"required name=search_term_string"}],"inLanguage":"en-US"}]}},"_links":{"self":[{"href":"https:\/\/stoneedge.com\/kb\/wp-json\/wp\/v2\/ht-kb\/91"}],"collection":[{"href":"https:\/\/stoneedge.com\/kb\/wp-json\/wp\/v2\/ht-kb"}],"about":[{"href":"https:\/\/stoneedge.com\/kb\/wp-json\/wp\/v2\/types\/ht_kb"}],"author":[{"embeddable":true,"href":"https:\/\/stoneedge.com\/kb\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/stoneedge.com\/kb\/wp-json\/wp\/v2\/comments?post=91"}],"version-history":[{"count":6,"href":"https:\/\/stoneedge.com\/kb\/wp-json\/wp\/v2\/ht-kb\/91\/revisions"}],"predecessor-version":[{"id":1290,"href":"https:\/\/stoneedge.com\/kb\/wp-json\/wp\/v2\/ht-kb\/91\/revisions\/1290"}],"wp:attachment":[{"href":"https:\/\/stoneedge.com\/kb\/wp-json\/wp\/v2\/media?parent=91"}],"wp:term":[{"taxonomy":"ht_kb_category","embeddable":true,"href":"https:\/\/stoneedge.com\/kb\/wp-json\/wp\/v2\/ht-kb-category?post=91"},{"taxonomy":"ht_kb_tag","embeddable":true,"href":"https:\/\/stoneedge.com\/kb\/wp-json\/wp\/v2\/ht-kb-tag?post=91"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}